How To Add A Faded Effect To An Image

Have you ever wanted to apply a faded look to an image?  It’s easier than you might think!  In this quick tutorial, I’ll show you how to quickly and easily add a faded effect to your images in Adobe Lightroom.

If you have any questions, please leave a comment below!  Be sure to check out the rest of my YouTube channel  and subscribe if you enjoy the videos and are learning something!

Thanks for watching!

Lightroom Quick Tip - Adding Keywords

Adding keywords to your photographs is easy and allows you to search for specific photographs within your Lightroom catalog.  The more keywords you use that are specific to that image, the better the chance you have of finding that image in the future if you need it.  Everyone has great images, but if you can’t find them, it doesn’t do you any good. 

In this quick tutorial, I’ll show you how to add keywords to your images that are already in your Lightroom catalog.

If you have any questions, please leave a comment below!  Be sure to check out the rest of my YouTube channel.  If there is anything you would like to learn in a future tutorial, please leave it in a comment below.

Subscribe if you enjoy the videos and are learning something!

Thanks for watching!

Lightroom Quick Tip - Star Ratings & Pick Flags

We all face the challenge of sorting through our images to find the keepers, the throwaways, and the best of the best.  Personally I use both star ratings and ‘pick’ flags to sort my images.  This tutorial is a quick tip on how to speed up your workflow when rating and picking images.  You might only save a small amount of time for each image you review, but over several hundred or several thousand images, the time will add up. 

Whenever possible, it helps to have Lightroom do the work for you.  In this case, we will make Lightroom auto advance to the next image after we apply the star rating or flag the image as a pick.  The first thing I do is to place all of my unrated images into one collection or folder.  While in the Library module, I make the first image full screen within Lightroom (or complete full screen by pressing the ‘F’ key in Lightroom 5).  This will allow you to see the image at a large size so you can make a good decision as to how you want to rate the image.  Next, make sure the caps lock is turned on.  By turning on the caps lock, Lightroom knows that it should automatically advance to the next image any time a rating is applied to the current image.  Once caps lock is on, use the number keys 1 through 5 to rate the images or press ‘P’ to flag the image as a pick. 

I rate all of my images with stars to help keep track of the quality of my images.  There is no right or wrong way to do it here, you need to find out what works for you.  Here is my rating system:

1 star = picture is no good, trash

2 stars = not usable other than for some kind of abstract background, image not in focus

3 stars = image in focus, but nothing special, more of a snapshot, sometimes deliverable depending on client and intent of photographs

4 stars = image in focus, good composition, interesting etc., deliverable image

5 stars = fantastic image, one of my favorites, deliverable image

I use a ‘Pick’ flag for all images that I want to deliver to a client, print, post on my website or blog, etc. 

After you initially review your images and rate them, it’s a good idea to revisit the images after a few days to see if you have changed your mind on any of the ratings you choose.  This can be a quick look through all of the images again.  You may see the hidden potential in an image that you did not notice the first time you reviewed the image.

Turning on the caps lock allows Lightroom to auto advance to the next image which will save you time and energy when reviewing your photographs.  By using a streamlined review process for your images, you will become more efficient in post processing as well as be able to spend more time working on the best images from your photoshoot.

If you have any questions, please leave a comment below!  Be sure to check out the rest of my YouTube channel.  

Please subscribe if you enjoy the videos and are learning something!

Thanks for watching!

How to Make a Bad Image Look Awesome

How many times have you looked at an image you took and thought it was no good?  By capturing your photos in RAW format, it is possible to recover your photo using Adobe Lightroom and turn it into something awesome. 

At first glance, I figured this file was no good.  I started playing with it just to see what I could get out of it.  It’s not as hard as you might think to bring back images that appear to be no good.  I think the results that came out of this photo are great. 

Remember that your camera can’t always capture what you envision in your mind when you take the photograph.  The post processing you can do to an image plays a big part in the creative process and helps your image to reach the potential you have pictured in your mind. 

If you have any questions, please leave a comment below!  Be sure to check out the rest of my YouTube channel. 

Subscribe if you enjoy the videos and are learning something!

Thanks for watching!

Twilight Sky - Before/After

Have you ever seen the sky have brilliant blues, purples, pinks, oranges and reds?  Many times when we try to photograph these beautiful skies, the camera does not capture the colors as vividly as we see them with our own eyes.  In this tutorial using Adobe Lightroom, I’ll show you how you can bring out the amazing colors that you know were there.  Having your camera set to save images in RAW format instead of JPG will help preserve the colors and detail that you will be able to enhance in Lightroom.

One thing to note here is that these settings are what worked for this image and what I thought looked best.  When I took the photograph I had an idea in my mind what I wanted the final result to be.  The key thing to remember here is that you need to experiment with the sliders and settings to find what you like and what works for your image.  With this in mind, lets get started!

Step 1

The first thing to do with this image is to drop the temperature and raise the tint.  This will help make the blue look more blue and the hint of pink look more pink.

Step 2

Increase the exposure to .75 and the contrast to 75.  I want the trees to be a black silhouette against the gradient in the sky.

Step 3

Basic Panel Settings

Adjust the Highlights, Shadows, Whites, and Blacks.  The image to the right shows the settings I used.  These settings will vary based on your image and the effect your going for.

Step 4

Increase Clarity.  I like to use Clarity on landscape shots.  I think it helps bring out details and increase the contrast a bit.  Be sure not to over do it with the clarity, unless of course that is the look you’re going for.   Increase the saturation.  I typically use vibrance when there are people in the image and saturation for landscape images. 

Step 5

Under ToneCurve I changed the curve to a medium contrast.  I want to make sure the trees are black against the sky.

Step 6

In the HSL panel, I used the target adjustment tool to modify the saturation of the purples.  This enhances the pink and purple colors of the sky.

Step 7

Add sharpening.  The sharpening settings I used are Amount: 86, Radius: 1.4, Detail: 52, and Masking: 64.  Adjust the masking as you need.  If you hold down the Opt. or Alt. key while clicking on the masking slider, you will see a preview of the areas that are being sharpened in white. 

View fullsize

Hold Opt. or Alt. while adjusting the Masking slider to see the areas that will be sharpened in white.

Step 8

Under Lens Corrections, I chose Remove Chromatic Aberrations to take care of some purple fringing around the trees.

Step 9

Add a Post-Crop Vignette.  I used an amount of 38 and changed the feather to 100.

The image is complete!  To see a before/after of your image, make sure you are in the Develop Module in Lightroom and press the ‘\’ key.  This will toggle between before and after images. 

If you have any questions or would like to learn other techniques in Lightroom, please leave a comment below.  Thanks for watching and reading this tutorial!

Before Image (left) and After Image (right).

Retouching Eyes - Part 1

In this tutorial series I’ll show you several techniques that can be used to retouch and enhance the eyes in a photograph.  In part one you will see a quick way using Adobe Lightroom to make the eyes in your photos ‘pop’ and draw the viewers attention to them.  Using simple techniques,   it is easy to take your images to the next level.  Enjoy!

Before/After - Dandelion in a Bubble

In this tutorial I’ll show you my post processing workflow for this dandelion in a bubble image.   I used Adobe Lightroom and Perfect Effects 8 for the post processing of this image.  In my opinion Perfect Effects is a great tool to use in combination with Lightroom. 

The image was taken with my Canon 60D using the 18-135 f3.5-5.6 IS lens at 120mm.  Camera settings in manual mode were, 1/250 sec at f8.0, ISO 400.  It was a cloudy overcast morning which created a nice diffuse light.

Step 1

Bring the image into Adobe Lightroom.

Step 2

Step 2 - Basic Panel Settings In Lightroom

Make some global adjustments in Lightroom.  Here I adjusted the exposure, highlights, shadows, whites and blacks.  I did not modify the contrast because I knew I wanted to use the dynamic contrast filter in Perfect Effects.  With these adjustments complete, I brought the image over into Perfect Effects by going to File – Plug-in Extras – Perfect Effects 8.

Step 3

Step 3 - Dynamic Contrast settings in Perfect Effects

Once the image is in Perfect Effects I started adding Filter Layers.  First, I added a Dynamic Contrast - Natural layer.  Under the Filter Options and Detail, I adjusted the settings as follows: Small = 30, Medium = 20, Large = 0.

Step 4

Add a new layer to the Filter Stack.  Choose Color Enhancer – Green Enhancer.  Using the mask tool, place a mask on top of the yellow dandelion so the effect is not applied to the flower.  The green is now a little to much, so reduce the layer opacity to 50%.

Step 5

Add a new layer to the Filter Stack.  Choose Sunshine – Glow.  Reduce the layer opacity to 20%.  Copy the layer mask from the previous ‘Color Enhancer’  layer by using Ctrl + click to drag the mask to the current layer. 

Step 6

Add a new layer to the Filter Stack.  Choose Sharpening – Amazing Detail Finder.      Using the masking bush, mask out the background and foreground of the image.  To see where you are masking, press Ctrl + M.  Since these areas are out of focus to begin with, they do not need to be sharpened. 

Step 7

Add a new layer to the Filter Stack.  Choose Vignette – Big Softy.  Reduce the layer opacity to 65%.

Step 8

Click Apply to apply the filters and bring the image back into Lightroom.

Please subscribe if you like my videos.

Thanks for watching!  

View fullsize

Final Image

Before/After Image Processing - Bleeding Hearts

Before - RAW File Out of Camera, Canon 60D, 50mm f/1.4, 1/500 sec at f/2.0, ISO 200         

View fullsize

After - Image Processed Using Adobe Lightroom & onOne Perfect Effects 8.                                                                                      

Ever have a chance to photograph a bleeding heart?  These are awesome plants!  The plants are beautiful when in bloom and I couldn't help but photograph this one.  This is a quick before/after tutorial to show you how I arrived at my final image.  After taking a few shots of this plant, I liked this one the best so lets get started!

Camera Setup & Settings

It was an overcast day with full cloud cover, just before a rain storm.  Cloudy days provide great light for photographs because the clouds cause the sky to act like a big soft box giving off nice even and diffuse light.  This image was shot with the Canon 60D using a 50mm f/1.4 lens.  The settings I used to create the image were 1/500 second at f/2.0, and and ISO of 200.  Every image I shoot is in RAW format.  I always recommend using RAW format since this will give you the highest quality and the best ability to modify images down the road if necessary.

Basic Panel Settings

Lightroom 

The first thing I did with this image was to bring the RAW file into Adobe Lightroom 5.  Next, I went into the develop module and applied some general adjustments to the image.  Starting at the top of the Basic panel, I worked my way down.  Exposure was increased by +.20 to help brighten the bleeding hearts a bit.  I reduced the contrast a because I love the dynamic contrast feature in Perfect Effects 8.  I'll use the dynamic contrast filter later on to bring back contrast in the image.  I pulled back on the highlights to insure there was no detail lost in the bottom section of the flowers.  Shadows were increased a bit to help bring out the entire flower.  Whites and blacks were adjusted a bit to help round out the image.  

Quick Tip:

When adjusting  Highlights, Shadows, Whites and Blacks, you can hold the option key on Mac and alt. key on a PC to show you the clipping points for each slider.  It's helpful in determining how much of each slider you use.

Perfect Effects

With these few global adjustments made, I'm now ready to bring the file over into Perfect Effects.  In Lightroom go to File > Plug-in Extras > Perfect Effects 8.

Once the image is opened in Perfect Effects, The first filter layer I'm going to add is Dynamic Contrast - Natural.  There are a few modifications I want to make on the Dynamic Contrast layer.  On the right side of the window, under Filter Options, there is a section called 'Detail'.  Here you have the ability to adjust how the Dynamic Contrast is applied to the image.  'Small' makes contrast adjustments to all of the small or fine details within the image.  I used a setting if 10.  Next, 'Medium' effects the contrast of the medium or mid size-details within the picture.  Most of the areas I want to see more contrast in are within the medium range.  Therefore I used a setting of 25 to get the amount of contrast I liked without over doing it.  'Large' effects the larger areas and textures in your image.  Here I don't want to add much contrast to the background, so I use a setting of 2.  You might be thinking - how do I know what settings to use?  The best thing to do is play with the sliders and see what you like.  Experimentation is the best way to see how things work and are affected by different settings.

Perfect Effects 8 - Bleeding Hearts Image with Dynamic Contrast Applied.

Next, add 2 new filter layers by clicking the '+' in the filter layer stack.  I want to enhance the color of the image, so I'm going go to the Filters on the left side of the window, then find 'Color Enhancer'.  For the first filter layer, lets choose 'Increase Color'.  Reduce the layer opacity to 40% so the effect is not over done.  On the next filter layer, again go to 'Color Enhancer' and choose 'Red Enhancer' to help bring out the magenta in the bleeding hearts.  Reduce the layer opacity to 20%.  I also made some adjustments in the filter options of the 'Red Enhancer' layer.  Under 'Color Range' I increased the saturation of both Magenta and Green just a touch to help it all pop a little more.     

Perfect Effects 8 - Color Enhancer Filters

The next adjustment is to add a 'Sunshine Filter'.  The sunshine filter really helps warm everything up and gives it a slight glow.  It helps convey a warm, happy feeling through the image.

Next we need to apply some sharpening to the image to help tighten everything up.  To do this, add a new layer in the Filter Stack.  Then, look under 'Sharpening' in the Filters list on the left hand side.  Select 'Amazing Detail Finder'.   Reduce the layer opacity to 90%.  Finally I think a vignette will finish off this image nicely.  Again, add a new layer in the Filter Stack.  Choose 'Vignette', then select 'Subtle'.  Now the image is complete.  Click 'Apply' at the bottom right hand side of the window and the filters will be applied and brought back into Lightroom. 

I hope this tutorial helps you to further understand how Adobe Lightroom and onOne's Perfect Effects can be used together to create great images.  If you have any questions, leave a comment below.  Thanks!

View fullsize

Lightroom 5 - Creating Metadata Presets

Metadata Presets

Setting up a metadata preset in Adobe Lightroom 5 is not only a timesaver, but it allows you to easily apply additional metadata information to any image file.  What is metadata?  Metadata is all of the information associated with your photograph.  For example, shutter speed, aperture, ISO, location, capture date/time and more.  Creating a preset is easy and only takes a few steps. 

In the Library Module, select an image.  Look on the right hand side of the screen for a tab titled ‘Metadata’.  Expand the tab.  Here you see all of the information that is associated with your images.  Take a look through all of the fields and fill out the ones that you would like to apply to your images.  Generally, the metadata information that I add includes my name, address, email, website and copyright information.  Once you have your information filled out you are ready to save it as a preset. 

Go to the top of the Edit Metadata Presets dialog box you’ll see the word ‘Preset’.  Click the pulldown menu and select ‘save current settings as new preset…’.  Name the preset and click ok. 

Now your metadata preset is all set up and ready to be used.  You can apply the preset on your images as you import them into Lightroom or to images that are already in your Lightroom library.

Thanks for watching!

Lightroom 5 - Creating Import Presets

Looking to speed up your Lightroom workflow?  Creating import presets is going to help you do that.  Import presets allow you to make all of the choices about how to import your images and where to store them and then save those settings as a preset.  Each time you import photos simply select your preset and all of your settings are applied automatically!  It’s a great time saver and prevents you from having to make all of the same choices and selections each time you import photos.   If you have any questions about setting up import presets in Adobe Lightroom, leave me a comment. 

Thanks for watching!

Getting Started in Lightroom - Importing Photos

I'm a big fan and advocate of Adobe Lightroom.  Lightroom is a fantastic program that I use for importing, organizing, and developing all of my photographs.  It took some learning to get up to speed on the program and how to use it, but now I could never go back to using simple folders or other methods of organizing my photographs.  Below is a quick tutorial of how to import photos into Lightroom 5.  If you have any questions, please leave a comment below or email me.

Getting Started in Lightroom 5

Adobe Lightroom 5 Logo

Getting started in Adobe Lightroom can be a little intimidating.  When I first got started using Adobe Lightroom I remember thinking 'how am I going to figure all this out?'  I literally spent days researching, learning and sorting through all the information I could find to help me understand the program and how to use it.  Little by little I learned the program, how to use it, how to set it up and how to take advantage of the tools that are available to me.  By sharing my experience and knowledge of Adobe Lightroom, my hope is to help others just as I have been helped along the way.  

In my experience, there are no great 'secrets' to all of this stuff - its really just techniques, settings, styles, creativity, interpretations etc. that you may not have thought of or may not have learned yet.  I love to learn and I learn something new every day.  All the information that I plan to provide is the way I use Lightroom and what works for me.  I'm not saying this is the only way to do things, it's just what I found to work for me.  So, lets get started!

Adobe Lightroom 5 - File Locations

First Things First

I'm assuming that you have already installed Lightroom on your computer and are ready to go.  I use a Mac, so my setup will be based on the Mac system.  There are a few things you should know as you get started using Adobe Lightroom (Lightroom).  

• Lightroom is a program that allows you to import, organize, manage, develop/process and export images.  It is a database for all of your images.
• The more information you input about your images through metadata, ratings, keywords, etc. the better you will be able to search for specific images later on.
• The Lightroom catalog houses all of the information related to your images - file locations, organizational structural, develop settings, ratings, keywords, etc.   
• Image files are separate from the Lightroom catalog and can be stored in a different location than the Lightroom catalog file.  
• Lightroom provides non-destructive editing of photos. 

With these few things in mind, we can get started on setting up Lightroom.  First, you want to think about where you would like to store your Lightroom catalog and where you would like to store your images.  

The Lightroom Catalog (.lrcat)

What I do and would recommend is to place the Lightroom catalog file (.lrcat file extension) on your local hard drive.  This will allow your computer to have the fastest access to the catalog.  Each time you load your catalog in Lightroom, all of the information contained in the catalog must be called up.  The quicker the computer can access the catalog file, the quicker Lightroom will be up and running.  I store my Lightroom catalog on my hard drive under Pictures>Lightroom>Focus Photography & Design>Learning Catalog_LR5.lrcat.  You can name your catalog anything you would like.  In this case, this will be the catalog I use for various tutorials, learning and teaching to help keep the program moving efficiently. 

Image File Location

Next, think about where you want to store your image files.  If you will not have a lot of images or if you have a large internal hard drive, it might make sense to save the images on your internal hard drive.  I use an external hard drive to store my images.  I use a Drobo that contains 4 bays of hard drives.  The Drobo has been a great system for me that offers tons of storage and I would recommend them if you need a large external hard drive system.  

On my external hard drive I created a folder called 'Lightroom'.  Inside the 'Lightroom' folder, I created another folder called 'Photos Go Here'.  This will be the main location for all of the images.  It is important to keep all of your images inside one main (or parent) folder.  This method of storing your files will be helpful later on should you decide to move all of your image files within Lightroom.  

From this point forward, it is best to create your organizational system/file structure directly in Lightroom.  As you import your images into Lightroom, the Lightroom catalog creates a link to your images within the catalog.  The image files are not stored physically inside the catalog file, rather the catalog remembers where they are by saving a linked to them.  You never want to move the image files around in Finder or Windows Explorer because the link to the image in the Lightroom catalog will be 'broken'.  You will then need to 'relink' the file (you will see a little question mark in the top corner of the image preview letting you know that Lightroom can't find the file).  The best way to move and/or organize your images is directly in Lightroom.  By moving items in Lightroom, the Lightroom catalog will automatically update the links for the new image file location.

Inside your 'Photos Go Here' folder (or whatever the name you choose), you can then create any kind of organizational structure you'd like.  Below are the top level folders that I have created to organize my images:

I currently have my images broken down by year, then 7 primary categories.  Inside those 7 primary categories I have additional folders with specific events, places, etc.  I have a separate directory for iPad and iPhone images as well as a separate directory for all business/work related photography.  Inside the work folder, I further break it down into clients, projects, etc.  

This is the system that works for me, but it might not be the best for you.  Think about what you need and what you think will work for you.  I do find my organizational structure evolving over time, however with the setup I have, it is easy to move images and folders directly within Lightroom.  Keep in mind, the more images you have, the longer it will take to move them all around if you decide to change your organizational structure.  

I hope these basics help when getting started in Lightroom.  If you have any questions about the file locations and setting up a directory I'd be happy to help you further.  Please leave me a comment below.